FORD Focus Edge Fusion Interface Installation Manual

Download This interface can insert RGB navigation/2AV/Camera signal onto Ford Focus, Edge ,Fusion and other ford screen. Features of this interface: ? It is compatible with all Ford 4Pin LVDS screen CD/screen systems which are available in Focus, Edge? ,Fusion and more, they have separate CD unit and screens. ? 64Mega dynamical memory is used inside for 2-dimensional spatial zoom and guarantee stable video signal to panel no matter what the input video source the installer use.[PAL/NTSC/No signal] ? Plug and play installation without hurting the original circuit and warranty label, Special PPS shell makes this interface stable against noise, Low EMI, and very reliable.[the black plastic shell is actually conductive] ? Optional Touch operation to installed DVD/TV tuner can be activated, so the installer can operate DVD without using the remote controller. ? Optional control port for installer’s expanding convenience, the control port has a Audio Relay selection trigger voltage ,also one touch screen selection trigger voltage, so the user can original touch screen for installer navigation unit, this is especially good for imported ford cars. ? This device is car temperature verified, surge voltage stability testified . 1?System connection. The Ford monitor has a 4Pin LVDS connector, connecting the CD/Radio unit and the Monitor. The connector to monitor should be inserted to this video interface’s CAR-In socket Then the interface’s LVDS tail plug should be inserted onto this monitor’s rear socket. Which was used by CD’s 4Pin connector. The 6Pin POWER conn. For the Interface box : YELLOW: 12V battery power RED=ACC ? whenthis wire goes to 12V, the interface works. BLACK ?Ground for chassis? GREEN?reverse wire[=12V]? white ? switch signal when =12V.[max 25V] GRAY ? specific control signal from the CAN box, do not connect to anything. ? When the 3 side keys are press, menu will traverse the selection, while +/- will modify the values. ? This OSD selection is only available to video input, the RGB-navi already been tuned to have nice color. ? The DVD/TUNER/NAVI option is to set the IR output to the video source, so the user can use touch screen to control DVD and video source operations.